View EASER162-NLW_7574704.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

the serials dotmatrix displays with rs-232 issue 6.2012 zeppelinstr. 19 d-82205 gilching phone +49-8105-77 80 90 fax +49-8105-77 80 99 www.lcd-module.de info@lcd-module.de features * 32 different sizes of displays available (1x8 up to 16x40) * supply voltage +5v or optional 9..35v 1) * incl. led-illumination switchable by means of software * 25 displays with yellow/green led-backlight * 7 displays with low power white led-backlight * 3 displays with snap in housing * high contrast supertwist lcd * incl. frontal bezel with antiglare glass 2) * automatic line management * cr / lf / scroll / cursor positioning * baudrate setting by jumper: 300, 1200, 2400 or 9600 baud * poti for contrast adjustment on board * multiple displays on single rs-232c options * supply +9..35v= instead of +5v= ea opt-9/35v 1) * rs-422 interface instead of rs-232 (standard) ea opt-rs422 1) * dip-switch for a ddress i nstead of solderbridge ea opt-dip6 1) accessories * cable with 9-pin d-sub female plug for pc ea kv24-9b 1) not available with ser308, ser408, ser3016 and ser4016 2) not available with ser082-c, ser204-4, ser242-b, ser3016 and ser4016 t h e s e r i a l s ea ser162-92nled with snap in housing accessories: cable ea kv24-9b length: 1,50 m
the serials page 2 electronic assembly reserves the right to change specifications without prior notice. printing and typographical errors reserved. adresseinstellung bei displays im snap-in adresseinstellung ber dip-schalter adresseinstellung per l?tbrcken 9..35v versorgung bei displays im snap-in gener al the serials the serials the serials the serials the serials represents a complete lcd-dotmatrix familiy with input circuit and frontal bezel. these lcd-modules also includes a rs-232 interface (or optional rs-422). the mounting is done through holes of the lcd-module, the data connection is made to a standard rs-232c/rs-422 interface. transfer rate can be set by jumper on 300, 1200, 2400 or 9600 baud. all cursor controls (line feed etc.) are performed automatically. all displays feature led-backlight illumination. matching frontal bezel with antiglare glass is included also. scheme p o w er suppl y / contrast adjustment supply voltage is +5v, current consumption depends on type of display and its illumination (100-800 ma, see table on page 20). the serials can be connected to power either by screw terminals or with rs-232 connector. display contrast is adjustable by potentiometer. i mpor tant: it is imperative that the polarity is correct. even very brief polarity reversal can damage the entire operating unit immediately and irreparably. multiple displa ys on a single rs-232c a single rs-232c can operate a number of displays. for that an individual adress must be assigned to each display. commands "select/deselect" will target each individual display. 1) not available with ser308, ser408, ser3016 and ser4016 2) not available with ser082-c, ser204-4, ser242-b, ser3016 and ser4016
the serials page 3 electronic assembly reserves the right to change specifications without prior notice. printing and typographical errors reserved. additional commands for 1..4 line displays after reset command code remark display mode esc m 5 overwrite-mode; autoflow off 4 6 overwrite-mode; autoflow on convert character code esc u 0 no character code conversion 1 1 convert character code to ibm-code (for englisch/japanisch character set) define character esc z n1 8 x data... n1=character no. (0..7); data = 8x bytes for new character led backlit on/off esc l n1 led backlit n1=0: off, n1=1: on; n1=2: invert; n1=3..255 n1/10 sec. on on write output port esc y n1 n2 n1=0: set all 6 output ports in accordance with n2 (=6-bit binary value) n1=1..8: reset output port n1 (n2=0); set (n2=1); invert (n2=2) all 1 version number esc v shows the version number on the display reset esc r resets and re-initializes the display and controller. before sending new data over the rs-232/rs-422 wait 500. table of commands after reset command code remark formfeed ff (dec.:12) ^l clear screen and place cursor to home position (1,1) carriage return cr (13) ^m set cursor into first column left hand linefeed lf (dec.:10) ^j move cursor down to next line cursor positioning esc o n1 n2 n1=column; n2=line; home-position (1,1) top left hand 1,1 cursor form esc c 0 hidden cursor 3 1 cursor in form of a flashing block 2 cursor as an underscore 3 cursor in form of a flashing block with an underscore display mode esc m 1 clear-mode; autoflow off 4 2 clear-mode; autoflow on 3 scroll-mode; autoflow off 4 scroll-mode; autoflow on select / deselect esc s adr select interface adress adr=0..254; (adr 255=all) select- ed d deselect interface adress adr=0..254; (adr 255=all) additional commands for 8- and 16-line displays after reset command code remark display mode esc m 5 clear-mode; autoflow off 4 6 clear-mode; autoflow on 7 scroll-mode; autoflow off 8 scroll-mode; autoflow on set letter type esc n set standard type; black letters; bright background n i set inverse letters; bright letters; black background b flashing letters; black letters flash on bright background l invers+flashing; bright letters flash on black background save actual settings esc p saves cursorform, display-mode and font-type in eeprom select / deselect esc a adr assignes a new select/deselect adress (8 bit) to the interface co m mands , d a t a transfer all incoming datas will be largely interpretated as ascii datas. when display fills up, the characters automatically scroll to the top. cr/lf will be recognized and executed. ff (12d/$0c) clears the display. cursor can be set manually by command i.e. "esc o" (esc=27d/$1b). the 8-line and 16-line displays offer beside standard-commands additional options: the 1-line, 2-line and 4-line displays offer beside standard-commands additional options:
the serials page 4 electronic assembly reserves the right to change specifications without prior notice. printing and typographical errors reserved. rs-422 socket (2x5 pins) pin symbol function pin symbol function 1 vd d +5v 2 data in- receive data 3 data in+ receive data 4 nc not connected 5 nc not connected 6 hs in- hs in- and hs out- bridged 7 hs in+ hs in+ and hs out+ bridged 8 hs out- 9 hs out+ 10 gnd 0v rs-232c socket (2x5 pins) pin symbol function pin symbol function 1 vd d +5v 2 dcd connection to dsr and dtr 3 dsr connection to dcd and dtr 4 nc not connected 5 cts cts and rts bridged 6 rxd data input 7 rts 8 dtr connection to dsr and dcd 9 rxd5 cmos close lb10+lb17 10 gnd 0v connection for 1- to 4-line diplays with ea opt-rs422 connection for ser308,ser408,ser3016,ser4016 connection for 1- to 4-line diplays connection for displays with snap-in with ea opt-rs422 connection for displays with snap-in rs-232c connection / baud r ates connection to rs-232c or rs-422 interface is made on a 2x5 pin type socket. with cable ea kv24-9b (accessories not for rs-422) the serials the serials the serials the serials the serials are ready to be connected directly to a pc. transfer rate can be set by jumper on 300, 1200, 2400 or 9600 baud. data format: if no jumper is set during power on, the display switches into self test mode and shows its character set. if the operating unit is ordered together with the ea opt-rs422 option, special rs-422 drivers are fitted. the pin assignment in the table on the right then applies. incidentally, the same serial data with 5v level and cmos logic is available at pin 9. these level are suitable for direct connection to a c. if these signal is used, the solder straps lb 10 + lb 17 must be closed!
the serials page 5 electronic assembly reserves the right to change specifications without prior notice. printing and typographical errors reserved. self defined char acter 1) 8 character (ascii codes $00..$07) are presetted with " ", "", "2", "3", "?", "?", "?", "" and can be redefined with the command "esc z n1 data...". after re-definition the presetted codes are no longer available. it makes sense to switch off the relocation of ascii codes via command 'esc u 0'. after power-on or reset the predefined codes are avaiable again. example: esc z $00 $04 $04 $04 $04 $15 $0e $04 $00 after that, character code $00 is defined as an downside arrow. note: for definition 8 data bytes are necesary. character data bit value hex (dez) 16 8 4 2 1 0 0 1 0 0 $04 (4) 0 0 1 0 0 $04 (4) 0 0 1 0 0 $04 (4) 0 0 1 0 0 $04 (4) 1 0 1 0 1 $15 (21) 0 1 1 1 0 $0e (14) 0 0 1 0 0 $04 (4) 0 0 0 0 0 $00 (0) digital output 1) there are up to 6 digital outputs out1..out6. they share with the solder link for address setting (cannot be used with ea opt-dip6). when one or more outputs are used, the possibility for address set is limited automatically. application e xample 1) each output line provides a npn transistor with about 50kohm pull-up resistor; i.e. only lo level is able to supply about 10ma. in summary current for out1..out6 may not exceed 15ma. high level is able to source up to 100a only. driving a higher load signal must be amplified by an external transistor or mosfet. 1) not for ser308, ser408, ser3016 and ser4016 1) not for ser308, ser408, ser3016 and ser4016: only the complete character set can be exchanged all versions except ea s erxxx-92 displays with snap-in case (ea serxx-92) after power-on all output are set to high. setting an output will be done by following command: 'esc y n1 n2' n1 : output no. 1, 2, 3, 4, 5 or 6 n2 = 0: output set to low (0v); n2=1: output set to high (5v); n2=2: invert output
the serials page 6 electronic assembly reserves the right to change specifications without prior notice. printing and typographical errors reserved. char acter set: 1- to 4-line displa ys all character listed beside are built-in for the 1- to 4-line displays. upper + lower $20 (dez: 32) $0 (0) $1 (1) $2 (2) $3 (3) $4 (4) $5 (5) $6 (6) $7 (7) $8 (8) $9 (9) $a (10) $b (11) $c (12) $d (13) $e (14) $f (15) $30 (dez: 48) $40 (dez: 64) $50 (dez: 80) $60 (dez: 96) $70 (dez: 112) $80 (dez: 128) $90 (dez: 144) $a0 (dez: 160) $b0 (dez: 176) $c0 (dez: 192) $d0 (dez: 208) $e0 (dez: 224) $f0 (dez: 240) char acter set: 8- and 16-line displa ys all 8- and 16-line displays ea ser308, ser408, ser3016 und ser4016 do provide the extended ibm character set (codes 32..255) incl. frame symbols. it is also possible to excange the character set totally (e.g. for cyrillic or special codes).this can be done together with the tools on ea disk9708 *) . char acter set: ea ser204-92hnled the ea ser204-92hnled do have a different character set. *) also in internet at http://www.lcd-module.de/deu/disk/disk9708.zip
the serials page 7 electronic assembly reserves the right to change specifications without prior notice. printing and typographical errors reserved. ea ser081-cnled incl. frontal bezel ea 017-2uke 1x8,zh 10.8mm ea ser161-dnled incl. frontal bezel ea 017-1uke 1x16,zh 6.6mm ea ser081-92nled incl. snap in housing ea 0092-ke 1x8,zh 11.48mm snap in panel cut out: 70,5 +0,5 x 48,5 +0,5 mm
the serials page 8 electronic assembly reserves the right to change specifications without prior notice. printing and typographical errors reserved. ea ser082-cnled incl. frontal bezel ea 017-8uke 1x8,zh 11.44mm ea ser161-enled incl. frontal bezel ea 017-6uke 1x16,zh 9.66mm
the serials page 9 electronic assembly reserves the right to change specifications without prior notice. printing and typographical errors reserved. ea ser162-n3lw incl. frontal bezel ea 017-2uke 2x16,zh 5.55mm ea ser162-cnled incl. frontal bezel ea 017-1uke 2x16,zh 4.35mm ea ser162-nled incl. frontal bezel ea 017-2uke 2x16,zh 5.55mm blue/white
the serials page 10 electronic assembly reserves the right to change specifications without prior notice. printing and typographical errors reserved. ea ser162-bnled incl. frontal bezel ea 017-12uke 2x16,zh 9.66mm ea ser162-nlw incl. frontal bezel ea 017-2uke 2x16,zh 5.55mm ea ser162-bnlw incl. frontal bezel ea 017-12uke 2x16,zh 9.66mm blue/white blue/white
the serials page 11 electronic assembly reserves the right to change specifications without prior notice. printing and typographical errors reserved. ea ser202-nled incl. frontal bezel ea 017-7uke 2x20, zh 5.55mm ea ser162-92nled incl. snap in housing ea 0092-ke 2x16,zh 6.68mm panel cut out: 70,5 +0,5 x 48,5 +0,5 mm snap in
the serials page 12 electronic assembly reserves the right to change specifications without prior notice. printing and typographical errors reserved. ea ser202-bhnled without frontal bezel 2x20,zh 9.2mm ea ser202-nlw incl. frontal bezel ea 017-7uke 2x20, zh 5.55mm blue/white ea ser202-cnlw 2x20,zh 12.7mm
the serials page 13 electronic assembly reserves the right to change specifications without prior notice. printing and typographical errors reserved. ea ser242-nled incl. frontal bezel ea 017-14uke 2x24,zh 5.55mm ea ser242-bnled without frontal bezel 2x24,zh 9.66mm ea ser402-nled incl. frontal bezel ea 017-4uke 2x40,zh 5.55mm
the serials page 14 electronic assembly reserves the right to change specifications without prior notice. printing and typographical errors reserved. ea ser402-nlw incl. frontal bezel ea 017-4uke 2x40,zh 5.55mm ea ser164-nled incl. frontal bezel ea 017-8uke 4x16,zh 4.75mm ea ser204-92hnled incl. snap in housing ea 0092-ke 4x20,zh 3.73mm panel cut out: 70,5 +0,5 x 48,5 +0,5 mm blue/white snap in
the serials page 15 electronic assembly reserves the right to change specifications without prior notice. printing and typographical errors reserved. ea ser204-nled incl. frontal bezel ea 017-9uke 4x20,zh 4.75mm ea ser204-nlw incl. frontal bezel ea 017-9uke 4x20,zh 4.75mm ea ser204-4nled without frontal bezel 4x20,zh 4.03mm blue/white
the serials page 16 electronic assembly reserves the right to change specifications without prior notice. printing and typographical errors reserved. blue/white ea ser204-bnled incl. frontal bezel ea 017-25ke 4x20,zh 9.2mm ea ser404-nlw incl. frontal bezel ea 017-13uke 4x40,zh 4.89mm ea ser404-hnled incl. frontal bezel ea 017-13uke 4x40,zh 4.89mm
the serials page 17 electronic assembly reserves the right to change specifications without prior notice. printing and typographical errors reserved. ea ser308-nled / ser408-nled incl. frontal bezel ea 017-10uke 8x30 bold / 8x40,zh 4.2mm
the serials page 18 electronic assembly reserves the right to change specifications without prior notice. printing and typographical errors reserved. attention handling precautions! caution! use esd precautionary procedures electrostatic sensitive components ea ser3016-nled / ser4016-nled without frontal bezel 16x30 bold / 16x40,zh 3.55mm
the serials page 19 electronic assembly reserves the right to change specifications without prior notice. printing and typographical errors reserved. drawing shows the nose piece for frontal bezels ea 017-xxuke; ea 017-xxke have a rim on full circumference. dimensions in mm fr ont al bezel / dimensions display type viewing area outside dim. mounting size frontal bezel a b c d e f g 1 line displays ea ser081-cnled 60,0 14,8 76,0 27,0 66,2 21,2 71,0 ea 017-2u ea ser161-dnled 63,5 12,8 79,5 25,0 69,7 19,2 74,5 ea 017-1u ea ser161-enled 98,5 12,8 114,5 25,0 104,7 19,2 109,5 ea 017-6u 2 line displays ea ser162-n3lw 60,0 14,8 76,0 27,0 66,2 21,2 71,0 ea 017-2u ea ser162-cnled 63,5 12,8 79,5 25,0 69,7 19,2 74,5 ea 017-1u ea ser162-nled ea ser162-nlw 60,0 14,8 76,0 27,0 66,2 21,2 71,0 ea 017-2u ea ser162-bnled ea ser162-bnlw 97,4 22,4 113,4 34,6 103,6 28,8 108,4 ea 017-12u ea ser202-nled ea ser202-nlw 81,5 17,2 97,5 29,4 87,7 23,6 92,5 ea 017-7u ea ser242-nled 92,0 14,8 108,0 27,0 98,4 21,2 103,0 ea 017-14u ea ser402-nled ea ser402-nlw 153,0 14,8 169,0 27,0 159,2 21,2 164,0 ea 017-4u 4 line displays ea ser164-nled 60,8 24,2 76,8 36,4 67,0 30,6 71,8 ea 017-8u ea ser204-nled ea ser204-nlw 75,0 24,2 91,0 36,4 81,2 30,6 86,0 ea 017-9u ea ser204-bnled 121,0 41,5 137,0 53,7 127,2 47,9 132,0 ea 017-25 ea ser404-nled ea ser404-nlw 145,0 28,0 161,0 40,2 151,2 34,4 156,0 ea 017-13u 8 line displays ea ser308-nled ea ser408-nled 131,0 38,0 147,0 50,2 137,2 44,4 142,0 ea 017-10u
the serials page 20 zeppelinstr. 19 d-82205 gilching phone +49-8105-77 8090 fax +49-8105-77 80 99 www.lcd-module.de info@lcd-module.de electronic assembly reserves the right to change specifications without prior notice. printing and typographical errors reserved. all ser ials ov er vie w dimensions in mm current in ma serial displays with rs-232 and led backlight ordering information lines x char. char. height module dimension viewing area bezel cutout bezel current typ. new ! keypad ea opt- tast5x5 w h d w h w h 1 line displays ea ser081-92nled 1x8 11.48 77.0 54.0 26.0 56.5 22.0 0092-ke 70.5 48.5 100 snap-in ea ser081-cnled 1x8 10.8 84.0 44.0 26.0 61.0 15.8 017-2uke 66.2 21.2 30 optional ea ser161-dnled 1x16 6.56 80.0 36.0 27.0 64.5 16.0 017-1uke 69.7 19.2 100 optional ea ser161-enled 1x16 9.66 122.0 33.0 27.0 99.0 13.0 017-6uke 104.7 19.2 170 optional 2 line displays ea ser082-cnled 2x8 11.44 84.0 44.0 27.5 63.0 25.0 017-8uke 67.0 30.6 90 optional ea ser162-n3lw 2x16 5.55 80.0 36.0 27.0 64.5 16.0 017-2uke 66.2 21.2 40 blue optional ea ser162-cnled 2x16 4.35 80.0 36.0 27.0 64.5 13.8 017-1uke 69.7 19.2 90 optional ea ser162-nled 2x16 5.55 84.0 44.0 29.0 61.0 15.8 017-2uke 66.2 21.2 120 optional ea ser162-nlw 2x16 5.55 84.0 44.0 27.0 64.5 16.0 017-2uke 66.2 21.2 40 blue optional ea ser162-92nled 2x16 6.68 77.0 54.0 26.0 56.5 22.0 0092-ke 70.5 48.5 100 snap-in ea ser162-bnled 2x16 9.66 122.0 44.0 29.0 99.0 24.0 017-12uke 103.6 28.8 360 optional ea ser162-bnlw 2x16 9.66 122.0 44.0 29.0 99.0 24.0 017-12uke 103.6 28.8 65 blue optional ea ser202-nled 2x20 5.55 116.5 39.0 29.0 85.0 18.6 017-7uke 87.7 23.6 210 optional ea ser202-nlw 2x20 5.55 116.5 39.0 26.0 85.0 18.6 017-7uke 87.7 23.6 40 blue optional ea ser202-bhnled 2x20 9.2 146.0 43.0 29.0 123.0 23.0 - 127.2 28.4 270 optional ea ser202-cnlw 2x20 12.7 190.0 54.0 29.0 149.0 31.0 - - - 100 blue optional ea ser242-nled 2x24 5.55 118.0 36.0 29.0 93.5 15.8 017-14uke 98.4 21.2 150 optional ea ser242-bnled 2x24 9.66 208.0 40.0 29.0 178.0 23.0 - - - 190 optional ea ser402-nled 2x40 5.55 182.0 33.5 29.0 154.1 15.3 017-4uke 159.2 21.2 150 optional ea ser402-nlw 2x40 5.55 182.0 33.5 27.0 154.1 15.3 017-4uke 159.2 21.2 40 blue optional 4 line displays ea ser164-nled 4x16 4.75 87.0 60.0 29.0 61.8 25.4 017-8uke 67.0 30.6 220 optional ea ser204-92hnled 4x20 3.73 77.0 54.0 26.0 56.5 22.0 0092-ke 70.5 48.5 100 snap-in ea ser204-4nled 4x20 4.03 80.8 47.0 29.0 60.0 22.0 - - - 90 optional ea ser204-nled 4x20 4.75 98.0 60.0 29.0 76.0 25.2 017-9uke 81.2 30.6 260 optional ea ser204-nlw 4x20 4.75 98.0 60.0 29.0 76.0 25.2 017-9uke 81.2 30.6 45 blue optional ea ser204-bnled 4x20 9.2 146.0 62.5 29.0 123.0 42.5 017-25ke 127.2 47.9 810 optional ea ser404-hnled 4x40 4.89 190.0 54.0 29.0 147.0 29.5 017-13uke 151.2 34.4 440 optional ea ser404-nlw 4x40 4.89 190.0 54.0 29.0 147.0 29.5 017-13uke 151.2 34.4 75 blue optional 8 line displays ea ser308-nled 8x30 4.2 bold 180.0 65.0 29.0 134.0 40.2 017-10uke 137.2 44.4 300 ea ser408-nled 8x40 4.2 180.0 65.0 29.0 134.0 40.2 017-10uke 137.2 44.4 300 16 line displays ea ser3016-nled 16 x 30 3.6 bold 144.0 104.0 29.0 114.0 64.0 --- - - 700 ea ser4016-nled 16 x 40 3.6 144.0 104.0 29.0 114.0 64.0 --- - - 700 attention handling precautions! caution! use esd precautionary procedures electrostatic sensitive components

▲Up To Search▲

Price & Availability of EASER162-NLW

	To Download EASER162-NLW Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .